15996248507@e-strong-tech.com +86-25-85479650
English 
 |
| Quantity: | |
|---|---|
This product has strong thickening ability, good low temperature performance, good shear stability, can meet the requirements of multi-stage long span internal combustion engine oil, mainly used in high and middle grade gasoline oil and diesel engine oil. Compared to ethylene propylene rubber, the sol speed is faster, the shear index is lower, and the use is safer and more stable.
It can be used to modulate 0W, 5W, 10W, 15W Grade internal combustion engine oil with good low temperature performance. According to the diesel nozzle shear results, the glue has good shear resistance, suitable for Multi grade engine oil.
Data Sheet
Item | Typical Value | Test Method |
Appearance | White powder | Visual |
Yellowness Index, # | 3.1 | HG/T 3862 |
Volatile Matter, %, | 0.2 | GB/T24131.2-2017 |
Ash Content,% | 0.08 | GB/T44981-2013 |
Hydrogenation Degree,% | 98.1 | Q/SH 1085 371-2020 |
Styrene Content,% | 5.2 | GB/T 13646 |
Nickel Residue, mg/kg | 5 | Q/SH 1085 371-2020 |
Thickening Power，mm2/s | 6.7 | Q/SH 1085 371-2020 |
Shear Stability Index，SSI (100℃) | 9 | Q/SH 1085 371-2020 |
Pour Point，℃ | -24 | GB/T 3535 |
| Comparisons among different VIIs when applied to 1% Group I Base Oil SN150 | ||||||
Test Item | Base Oil | HSD-1 | SEPS | Infineum | lubrizol | PetroChina |
SN150 | - | HV 4030 | SV260 | LZ7067 | J0010 | |
Kinematic Viscosity@40℃，mm2/s | 28.97 | 79.64 | 81.05 | 65.81 | 64.38 | |
Kinematic Viscosity@100℃，mm2/s | 4.98 | 12.08 | 12.61 | 9.87 | 9.64 | |
Viscosity Index | 95 | 147 | 154 | 133 | 131 | |
Thickening Ability，mm2/s | / | ≥7.0 | 7.1 | 7.62 | 4.89 | 4.52 |
SSI，% | / | ≤10 | 8.86 | 6.95 | 23.12 | 25.87 |
Pour Point，℃ | -12 | ≤-12 | -18 | -12 | -15 | -12 |
This product has strong thickening ability, good low temperature performance, good shear stability, can meet the requirements of multi-stage long span internal combustion engine oil, mainly used in high and middle grade gasoline oil and diesel engine oil. Compared to ethylene propylene rubber, the sol speed is faster, the shear index is lower, and the use is safer and more stable.
It can be used to modulate 0W, 5W, 10W, 15W Grade internal combustion engine oil with good low temperature performance. According to the diesel nozzle shear results, the glue has good shear resistance, suitable for Multi grade engine oil.
Data Sheet
Item | Typical Value | Test Method |
Appearance | White powder | Visual |
Yellowness Index, # | 3.1 | HG/T 3862 |
Volatile Matter, %, | 0.2 | GB/T24131.2-2017 |
Ash Content,% | 0.08 | GB/T44981-2013 |
Hydrogenation Degree,% | 98.1 | Q/SH 1085 371-2020 |
Styrene Content,% | 5.2 | GB/T 13646 |
Nickel Residue, mg/kg | 5 | Q/SH 1085 371-2020 |
Thickening Power，mm2/s | 6.7 | Q/SH 1085 371-2020 |
Shear Stability Index，SSI (100℃) | 9 | Q/SH 1085 371-2020 |
Pour Point，℃ | -24 | GB/T 3535 |
| Comparisons among different VIIs when applied to 1% Group I Base Oil SN150 | ||||||
Test Item | Base Oil | HSD-1 | SEPS | Infineum | lubrizol | PetroChina |
SN150 | - | HV 4030 | SV260 | LZ7067 | J0010 | |
Kinematic Viscosity@40℃，mm2/s | 28.97 | 79.64 | 81.05 | 65.81 | 64.38 | |
Kinematic Viscosity@100℃，mm2/s | 4.98 | 12.08 | 12.61 | 9.87 | 9.64 | |
Viscosity Index | 95 | 147 | 154 | 133 | 131 | |
Thickening Ability，mm2/s | / | ≥7.0 | 7.1 | 7.62 | 4.89 | 4.52 |
SSI，% | / | ≤10 | 8.86 | 6.95 | 23.12 | 25.87 |
Pour Point，℃ | -12 | ≤-12 | -18 | -12 | -15 | -12 |
